Multi-Purpose Primer. Item 1 of 1
Multi-Purpose Primer
Benjamin Moore
A multi-project, acrylic primer.
See Product DetailsSelect Fulfilment Method
* Required
This item is currently unavailable.
Benjamin Moore® Multi-Purpose Primer is 100% acrylic that delivers strong adhesion and a mildew-resistant coating in a quick-drying, low-VOC formula. The spatter-resistant primer is ideal for multiple interior and exterior surfaces, offers good stain-blocking and can be recoated in one hour.
- Strong adhesion and sealing for interior and exterior surface
- Mildew-resistant coating
- Quick drying – 1 hour recoat time
- Low-VOC
- Good stain blocking
- Spatter resistant
| Key Feature(s) | Quick Drying|Mildew Resistant Coating|Strong Adhesion |
|---|---|
| Interior/Exterior | Interior / Exterior |
| Recommended For Use On | Interior: New or previously painted wood| plywood| drywall| ceiling tile| Formica| Masonite| ceramic tile and cured plaster. Exterior: New or previously painted wood| fiber cement board| hardboard siding| aluminum| galvanized metal| brick| cured masonry and previously coated ferrous metal surfaces. |
| Surface | Drywall|Plaster|Wood|Masonry|Non-Ferrous Metal|Vinyl |
| VOC Range | 29.5 |
| Compliance & Certifications | VOC compliant in all areas |
| Coverage (Sq. Ft./Gal) | 350-450 |
| Number of Recommended Coats | 1 or 2 |
| Dry Time | 30 minutes |
| Recoat Time | 1 hour |
| Full Cure (Days) | 14 |
| Resin Vehicle Type | 100% Acrylic Latex |
| Clean Up | Soap and Water |
| Volume Solids (±2%) | 36.0 |
| WFT: Wet Film Thickness (mils) | 3.6-4.4 |
| DFT: Dry Film Thickness (mils) | 1.3-1.6 |
| WPG (Weight per Gallon) | 10.3 |
| Application Method | Nylon/Polyester Professional Brushes| High Capacity Professional Roller Covers |
| Application Temp Range (°F) | 40-90 |
| Application Spray Pressure (PSI) | 1500-2500 |
| Recommended For Use On | Interior: New or previously painted wood| plywood| drywall| ceiling tile| Formica| Masonite| ceramic tile and cured plaster. Exterior: New or previously painted wood| fiber cement board| hardboard siding| aluminum| galvanized metal| brick| cured masonry and previously coated ferrous metal surfaces. |
|---|
| Key Feature(s) | Quick Drying|Mildew Resistant Coating|Strong Adhesion |
|---|---|
| Interior/Exterior | Interior / Exterior |
| Surface | Drywall|Plaster|Wood|Masonry|Non-Ferrous Metal|Vinyl |
| VOC Range | 29.5 |
| Compliance & Certifications | VOC compliant in all areas |
| Coverage (Sq. Ft./Gal) | 350-450 |
| Number of Recommended Coats | 1 or 2 |
| Dry Time | 30 minutes |
| Recoat Time | 1 hour |
| Full Cure (Days) | 14 |
| Resin Vehicle Type | 100% Acrylic Latex |
| Clean Up | Soap and Water |
| Volume Solids (±2%) | 36.0 |
| WFT: Wet Film Thickness (mils) | 3.6-4.4 |
| DFT: Dry Film Thickness (mils) | 1.3-1.6 |
| WPG (Weight per Gallon) | 10.3 |
| Application Method | Nylon/Polyester Professional Brushes| High Capacity Professional Roller Covers |
| Application Temp Range (°F) | 40-90 |
| Application Spray Pressure (PSI) | 1500-2500 |
Technical Data Sheets
TDS 0067 (English)Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.Reported technical data is representative of the product line. Contact Benjamin Moore for values of specific bases or colors. See Technical Data Sheet (TDS) for additional information.For the most up-to-date MPI specifications, visit www.mpi.net