Rubber Based Swimming Pool Paint - Satin. Item 1 of 1
Rubber Based Swimming Pool Paint - Satin
Insl-X
A collection of four pool paint technologies to meet the needs of almost any pool painting situation.
See Product Details- Durable
- Low Sheen finish
- VOC compliant
- Resists fading
- Durable against alkalis
Sheen
Select Fulfillment Method
* Required
This item is currently unavailable.
It delivers excellent chemical and abrasion resistance and is suitable for use in fresh, salt, and chlorinated water.
- For use over existing chlorinated rubber or synthetic rubber-based pool paints if in good condition
- Can be applied on well-prepared concrete, marcite, gunite, and other masonry
- For use in pools with fresh, salt, and chlorinated water
- For residential or commercial pools
- OTC-compliant, solvent-based pool paint
- Excellent chemical and abrasion resistance
| Key Feature(s) | 1 Part | Alkali Resistant | Tinted | UV Resistant |
|---|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior | |
| Recommended For Use On | Concrete | |||
| Surface | Concrete | |||
| VOC Level | < 400 | |||
| VOC Range | < 400 | |||
| Compliance & Certifications | VOC compliant in all areas | |||
| Coverage (Sq. Ft./Gal) | 400-500 | |||
| Number of Recommended Coats | 2 | |||
| Dry Time | 30 Minutes | |||
| Recoat Time | 12-24 Hours | |||
| Return to Service (Days) | 7-14 | |||
| Resin Vehicle Type | Other | |||
| Clean Up | Mineral Spirits | |||
| Volume Solids (±2%) | 59.0 | |||
| WFT: Wet Film Thickness (mils) | 3.6 | |||
| DFT: Dry Film Thickness (mils) | 2.2 | |||
| WPG (Weight per Gallon) | 12.9 | |||
| Application Method | Brush | Roll | Spray | |
| Application Temp Range (°F) | 40-90 | |||
| Application Spray Pressure (PSI) | 2000 | |||
| Segment | Residential | Commercial | ||
| Project | Pool |
| Recommended For Use On | Concrete |
|---|
| Key Feature(s) | 1 Part | Alkali Resistant | Tinted | UV Resistant |
|---|---|---|---|---|
| Interior/Exterior | Interior | Exterior | Interior/Exterior | |
| Surface | Concrete | |||
| VOC Level | < 400 | |||
| VOC Range | < 400 | |||
| Compliance & Certifications | VOC compliant in all areas | |||
| Coverage (Sq. Ft./Gal) | 400-500 | |||
| Number of Recommended Coats | 2 | |||
| Dry Time | 30 Minutes | |||
| Recoat Time | 12-24 Hours | |||
| Return to Service (Days) | 7-14 | |||
| Resin Vehicle Type | Other | |||
| Clean Up | Mineral Spirits | |||
| Volume Solids (±2%) | 59.0 | |||
| WFT: Wet Film Thickness (mils) | 3.6 | |||
| DFT: Dry Film Thickness (mils) | 2.2 | |||
| WPG (Weight per Gallon) | 12.9 | |||
| Application Method | Brush | Roll | Spray | |
| Application Temp Range (°F) | 40-90 | |||
| Application Spray Pressure (PSI) | 2000 | |||
| Segment | Residential | Commercial | ||
| Project | Pool |
Safety Data Sheets
RP-27XX-SDS RP-2710 (English)RP-27XX-SDS RP-2710 (Español)RP-27XX-SDS RP-2719 (English)RP-27XX-SDS RP-2720 (English)RP-27XX-SDS RP-2720 (Español)RP-27XX-SDS RP-2719 (Español)RP-27XX-SDS RP-2723 (English)RP-27XX-SDS RP-2723 (Español)RP-27XX-SDS RP-2724 (English)RP-27XX-SDS RP-2724 (Español)Technical Data Sheets
RP-27XX-TDS RP-27XX (English)For California Residents