Fast Sanding Primer. Item 1 of 1
Fast Sanding Primer
Benjamin Moore
A professional quality primer that sands to a powder after only one hour.
See Product Details- Ready to sand in 1 hour
- Smooth flow and levelling
- Low VOC
- Excellent sealing properties
- Interior use
Select Fulfilment Method
* Required
This item is currently unavailable.
Delivers on two fronts: efficiency and professional quality results.
- Ideal for priming wood surfaces, as well as drywall and plaster
- Use on walls, doors, and trim
- Excellent sealing properties and holdout
- Provides a uniform finish
| Key Feature(s) | 1 Part | Low Odor | Low VOC | Multi-Substrate | Quick Drying | Sealer | Spatter Resistant | Tinted |
|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | |||||||
| Recommended For Use On | Composite, Composite Wood, Drywall, Plaster, Wood | |||||||
| Surface | Composite | Composite Wood | Drywall | Plaster | Wood | |||
| VOC Range | < 50 | |||||||
| Compliance & Certifications | VOC compliant in all areas | |||||||
| Coverage (Sq. Ft./Gal) | 32.5 à 41.8 m2 (350 à 450 pi2) | |||||||
| Number of Recommended Coats | 1 or 2 | |||||||
| Dry Time | 30 Minutes | |||||||
| Recoat Time | 1-2 Hours | |||||||
| Full Cure (Days) | 14 | |||||||
| Resin Vehicle Type | Acrylic | Latex | Waterborne | |||||
| Clean Up | Soap and Water | |||||||
| Volume Solids (±2%) | 34.0 | |||||||
| WFT: Wet Film Thickness (mils) | 3.5-4.4 | |||||||
| DFT: Dry Film Thickness (mils) | 1.2-1.5 | |||||||
| WPG (Weight per Gallon) | 52 kg (11.4 lbs) | |||||||
| Application Method | Brush | Roll | Spray | |||||
| Application Temp Range (°F) | 10-32.2 °C (50-90 °F) | |||||||
| Application Spray Pressure (PSI) | 1,500-2,500 | |||||||
| Segment | Residential | Commercial | ||||||
| Project | Basement | Bedroom | Cabinet | Door | Kitchen | Living Room | Trim |
| Recommended For Use On | Composite, Composite Wood, Drywall, Plaster, Wood |
|---|
| Key Feature(s) | 1 Part | Low Odor | Low VOC | Multi-Substrate | Quick Drying | Sealer | Spatter Resistant | Tinted |
|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | |||||||
| Surface | Composite | Composite Wood | Drywall | Plaster | Wood | |||
| VOC Range | < 50 | |||||||
| Compliance & Certifications | VOC compliant in all areas | |||||||
| Coverage (Sq. Ft./Gal) | 32.5 à 41.8 m2 (350 à 450 pi2) | |||||||
| Number of Recommended Coats | 1 or 2 | |||||||
| Dry Time | 30 Minutes | |||||||
| Recoat Time | 1-2 Hours | |||||||
| Full Cure (Days) | 14 | |||||||
| Resin Vehicle Type | Acrylic | Latex | Waterborne | |||||
| Clean Up | Soap and Water | |||||||
| Volume Solids (±2%) | 34.0 | |||||||
| WFT: Wet Film Thickness (mils) | 3.5-4.4 | |||||||
| DFT: Dry Film Thickness (mils) | 1.2-1.5 | |||||||
| WPG (Weight per Gallon) | 52 kg (11.4 lbs) | |||||||
| Application Method | Brush | Roll | Spray | |||||
| Application Temp Range (°F) | 10-32.2 °C (50-90 °F) | |||||||
| Application Spray Pressure (PSI) | 1,500-2,500 | |||||||
| Segment | Residential | Commercial | ||||||
| Project | Basement | Bedroom | Cabinet | Door | Kitchen | Living Room | Trim |
Safety Data Sheets
K507-SDS K507-00 (English)Technical Data Sheets
K507-TDS K507 (English)