Waterborne Ceiling Paint - Ultra Flat
Benjamin Moore
For flawless ceilings in any colour.
Waterborne Ceiling Paint is our most premium ceiling paint that delivers beautiful, flawless results in an ulti-flat finish.
See Product Details- Our most premium ceiling paint
- Ultra-flat finish for a flawless look
- Minimizes lap marks and imperfections
- Zero VOC, low odour
- Available in all colours
Sheen
* Required
Select Colour
* Required
Select Fulfilment Method
* Required
Qty
Waterborne Ceiling Paint is uniquely formulated to consistently deliver the most beautiful ceilings in any colour by minimizing imperfections and glare.
- Ultra-flat finish that hides imperfections, minimizes lap marks and reduces glare
- Formulated to minimize spatter for easier clean up
- Dries quickly for fast recoat
- Zero VOC, low odour
- Available in 3,500+ unmatchable colours
- Backed by Gennex Colour Technology®, our unbeatable combination of proprietary colorants and formulas
| Key Feature(s) | 1 Part | Block-Resistant | High Hide | Leveling | Low Odor | Low VOC | Multi-Substrate | Quick Drying | Self Priming | Flow & Levelling | Spatter Resistant | Tintable | Tinted | Zero Emissions |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | |||||||||||||
| Recommended For Use On | Ceiling Tile, Composite Wood, Drywall, Masonry, Plaster, Wood | |||||||||||||
| Surface | Ceiling Tile | Composite Wood | Drywall | Masonry | Plaster | Wood | ||||||||
| VOC Range | Zero | |||||||||||||
| Compliance & Certifications | VOC compliant in all areas | |||||||||||||
| Coverage (Sq. Ft./Gal) | 37-42 m2/3.79 L can | |||||||||||||
| Number of Recommended Coats | 1 or 2 | |||||||||||||
| Dry Time | 1 Hour | |||||||||||||
| Recoat Time | 1-2 Hours | |||||||||||||
| Full Cure (Days) | 14 | |||||||||||||
| Resin Vehicle Type | Acrylic | Latex | Waterborne | |||||||||||
| Clean Up | Soap and Water | |||||||||||||
| Volume Solids (±2%) | 40,3 | |||||||||||||
| WFT: Wet Film Thickness (mils) | 3.6-4.0 | |||||||||||||
| DFT: Dry Film Thickness (mils) | 1.4-1.6 | |||||||||||||
| WPG (Weight per Gallon) | 5.2 kg (11.8 lbs) | |||||||||||||
| Application Method | Brush | Roll | Spray | |||||||||||
| Application Temp Range (°F) | 10-32.2 °C (50-90 °F) | |||||||||||||
| Application Spray Pressure (PSI) | 1,000-2,000 | |||||||||||||
| Segment | Residential | Commercial | ||||||||||||
| Project | Bathroom Ceiling | Ceiling |
| Recommended For Use On | Ceiling Tile, Composite Wood, Drywall, Masonry, Plaster, Wood |
|---|
| Key Feature(s) | 1 Part | Block-Resistant | High Hide | Leveling | Low Odor | Low VOC | Multi-Substrate | Quick Drying | Self Priming | Flow & Levelling | Spatter Resistant | Tintable | Tinted | Zero Emissions |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Interior/Exterior | Interior | |||||||||||||
| Surface | Ceiling Tile | Composite Wood | Drywall | Masonry | Plaster | Wood | ||||||||
| VOC Range | Zero | |||||||||||||
| Compliance & Certifications | VOC compliant in all areas | |||||||||||||
| Coverage (Sq. Ft./Gal) | 37-42 m2/3.79 L can | |||||||||||||
| Number of Recommended Coats | 1 or 2 | |||||||||||||
| Dry Time | 1 Hour | |||||||||||||
| Recoat Time | 1-2 Hours | |||||||||||||
| Full Cure (Days) | 14 | |||||||||||||
| Resin Vehicle Type | Acrylic | Latex | Waterborne | |||||||||||
| Clean Up | Soap and Water | |||||||||||||
| Volume Solids (±2%) | 40,3 | |||||||||||||
| WFT: Wet Film Thickness (mils) | 3.6-4.0 | |||||||||||||
| DFT: Dry Film Thickness (mils) | 1.4-1.6 | |||||||||||||
| WPG (Weight per Gallon) | 5.2 kg (11.8 lbs) | |||||||||||||
| Application Method | Brush | Roll | Spray | |||||||||||
| Application Temp Range (°F) | 10-32.2 °C (50-90 °F) | |||||||||||||
| Application Spray Pressure (PSI) | 1,000-2,000 | |||||||||||||
| Segment | Residential | Commercial | ||||||||||||
| Project | Bathroom Ceiling | Ceiling |
Technical Data Sheets
K508_K508_TDS (English)Please note that not all Benjamin Moore & Co., Limited products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. Reported technical data is representative of the product line. Contact Benjamin Moore® for values of specific bases or colours. See Technical Data Sheet (TDS) for additional information. For the most up-to-date MPI specifications, visit www.mpi.net