Latex Dry Fall - Flat | Benjamin Moore
  • Latex Dry Fall - Flat
Latex Dry Fall - Flat. Item 1 of 1

Latex Dry Fall - Flat

Benjamin Moore

This fast dry interior latex is designed for overspray to settle as a dry powder in approximately 10 feet of fall.

See Product Details
  • Fast drying
  • Minimal surface preparation
  • Flat finish

Sheen

Select Fulfillment Method

* Required

This item is currently unavailable.

For spray application to interior ceilings, walls and structural members in commercial and institutional buildings. Overspray dries to dust before reaching the floor.

  • Overspray settles as dry powder (10 ft.)
  • Superior hiding and low VOCs
  • Meets MPI standards and is eligible for LEED® v4 credit
  • Fast dry for quick recoat
  • Minimal surface preparation
  • Qualifies for CHPS low emitting credit
Key Feature(s)1 PartDry FallHigh HideMulti-SubstrateQuick Drying
Interior/ExteriorInterior
Recommended For Use OnDrywall, Concrete, Masonry, Wood, Plaster
SurfaceDrywallConcreteMasonryWoodPlaster
VOC Range< 50
Compliance & CertificationsVOC compliant in all areas
Coverage (Sq. Ft./Gal)250-425
Number of Recommended Coats1 or 2
Dry Time30 Minutes
Recoat Time1 Hour
Return to Service (Days)14
Resin Vehicle TypeAcrylicLatexWaterborne
Clean UpSoap and Water
Volume Solids (±2%)41.0
WFT: Wet Film Thickness (mils)3.8-6.4
DFT: Dry Film Thickness (mils)1.6-2.7
WPG (Weight per Gallon)12.9
Application MethodSpray
Application Temp Range (°F)50-90
Application Spray Pressure (PSI)1800-3000
SegmentCommercial
ProjectCeiling
Recommended For Use OnDrywall, Concrete, Masonry, Wood, Plaster
Key Feature(s)1 PartDry FallHigh HideMulti-SubstrateQuick Drying
Interior/ExteriorInterior
SurfaceDrywallConcreteMasonryWoodPlaster
VOC Range< 50
Compliance & CertificationsVOC compliant in all areas
Coverage (Sq. Ft./Gal)250-425
Number of Recommended Coats1 or 2
Dry Time30 Minutes
Recoat Time1 Hour
Return to Service (Days)14
Resin Vehicle TypeAcrylicLatexWaterborne
Clean UpSoap and Water
Volume Solids (±2%)41.0
WFT: Wet Film Thickness (mils)3.8-6.4
DFT: Dry Film Thickness (mils)1.6-2.7
WPG (Weight per Gallon)12.9
Application MethodSpray
Application Temp Range (°F)50-90
Application Spray Pressure (PSI)1800-3000
SegmentCommercial
ProjectCeiling