Ultra Spec® Masonry Int/Ext 100% Acrylic Sealer. Item 1 of 1
Ultra Spec® Masonry Int/Ext 100% Acrylic Sealer
Benjamin Moore
Penetrates and seals new or previously painted masonry surfaces providing the proper foundation for finish coats.
See Product Details- Penetrates and seals masonry
- Reduces porosity
- Excellent adhesion
- Alkali Resistant
Sheen
Select Fulfillment Method
* Required
This item is currently unavailable.
Recommended for application to new or previously painted masonry surfaces including; tilt-up concrete construction, stucco surfaces and block construction.
- Reduces the porosity of masonry finishes
- Provides excellent adhesion
- High alkali resistance - up to pH 13
- Qualifies for LEED® v4 Credit
- White may be tinted
| Sub Category | Acrylic | ||||
|---|---|---|---|---|---|
| Key Feature(s) | 1 Part | Alkali Resistant | Low VOC | Sealer | UV Resistant |
| Interior/Exterior | Interior | Exterior | Interior/Exterior | ||
| Recommended For Use On | Brick, Concrete, Masonry, Stone, Stucco | ||||
| Surface | Brick | Concrete | Masonry | Stone | Stucco |
| VOC Range | < 50 | ||||
| Compliance & Certifications | VOC Compliant in all areas | ||||
| Specifications | MPI 3, Qualifies for LEED® 2009, Qualifies for LEED® v4 credit, Qualifies for CHPS low emitting credit, Health Product Declaration available, CDPHv1 Emission certified | ||||
| Coverage (Sq. Ft./Gal) | 200-400 | ||||
| Number of Recommended Coats | 1 | ||||
| Dry Time | 1 Hour | ||||
| Recoat Time | 4 Hours | ||||
| Return to Service (Days) | 14 | ||||
| Resin Vehicle Type | Acrylic | Latex | Waterborne | ||
| Clean Up | Soap and Water | ||||
| Volume Solids (±2%) | 17.8 | ||||
| WFT: Wet Film Thickness (mils) | 4.0-8.0 | ||||
| DFT: Dry Film Thickness (mils) | 0.9-1.7 | ||||
| WPG (Weight per Gallon) | 8.5 | ||||
| Application Method | Brush | Roll | Spray | ||
| Application Temp Range (°F) | 50-90 | ||||
| Application Spray Pressure (PSI) | 1000-2000 | ||||
| Segment | Commercial | ||||
| Project | Siding | Basement | Garage |
| Interior/Exterior | Interior | Exterior | Interior/Exterior |
|---|
| Sub Category | Acrylic | ||||
|---|---|---|---|---|---|
| Key Feature(s) | 1 Part | Alkali Resistant | Low VOC | Sealer | UV Resistant |
| Recommended For Use On | Brick, Concrete, Masonry, Stone, Stucco | ||||
| Surface | Brick | Concrete | Masonry | Stone | Stucco |
| VOC Range | < 50 | ||||
| Compliance & Certifications | VOC Compliant in all areas | ||||
| Specifications | MPI 3, Qualifies for LEED® 2009, Qualifies for LEED® v4 credit, Qualifies for CHPS low emitting credit, Health Product Declaration available, CDPHv1 Emission certified | ||||
| Coverage (Sq. Ft./Gal) | 200-400 | ||||
| Number of Recommended Coats | 1 | ||||
| Dry Time | 1 Hour | ||||
| Recoat Time | 4 Hours | ||||
| Return to Service (Days) | 14 | ||||
| Resin Vehicle Type | Acrylic | Latex | Waterborne | ||
| Clean Up | Soap and Water | ||||
| Volume Solids (±2%) | 17.8 | ||||
| WFT: Wet Film Thickness (mils) | 4.0-8.0 | ||||
| DFT: Dry Film Thickness (mils) | 0.9-1.7 | ||||
| WPG (Weight per Gallon) | 8.5 | ||||
| Application Method | Brush | Roll | Spray | ||
| Application Temp Range (°F) | 50-90 | ||||
| Application Spray Pressure (PSI) | 1000-2000 | ||||
| Segment | Commercial | ||||
| Project | Siding | Basement | Garage |
For California Residents